These cases are usually caused by empty printer ink or toner or the endless ribbon of carbon that exist in your printer. Try to replace the ink, toner, or ribbons with a new printer. Do not forget to check whether something is blocking the head with a paper (eg a plastic seal on a new printer). There are cases on the printer that uses ink, where ink is still in the printer heads have dried up because the old printer is not used so there is preventing to the head. Especially to the printer can be easily removed, these problems can sometimes be solved by following simple ways:
- Raise your head and cartridge from the printer.
- Separate ink cartridge from the head.
- Make sure you do not choose the existing electronic circuit printer head off because you can destroy it.
- Take hot water, pour into a bowl.
- Dip the tip of the head into the existing hot water in the bowl. Pay attention do not touch the water through to the electronic circuit because it will destroy it.
- Shake the head until the ink inside turn into liquid
- Change the water and repeat the way before until 4 or 5 times
- Dry the head with a soft cloth until dried
- Replace ink cartridge with the head. It is recommended to use the new cartridge
- Install the head and cartridge into printer
- Finally, Try to use it. Good luck
These cases are usually caused by empty printer ink or toner or the endless ribbon of carbon that exist in your printer. Try to replace the ink, toner, or ribbons with a new printer. Do not forget to check whether something is blocking the head with a paper (eg a plastic seal on a new printer). There are cases on the printer that uses ink, where ink is still in the printer heads have dried up because the old printer is not used so there is preventing to the head. Especially to the printer can be easily removed, these problems can sometimes be solved by following simple ways: