Reset Canon Pixma MP460 Manually

Here some methods how to Reset Ink Level Canon Pixma MP460 Manually

1. Disconnect the power cable
2. Hold down power button
3. Reconnect the power cable
4. While the power button still on hold, press twice the “Cancel/Stop” red button
5. Release the power button
6. The printer is now in factory mode…(wait about 30 seconds until it confirms “idle”)
7. Press the down arrow (next to the “OK” button) until it says “Shipping Mode 1”
8. Press the “OK” Button
9. Now with it displaying “Without Cleaning” press the power button
10. A test page should print
11. Now open cover
12. Disconnect the power again
13. Take both cartridges out normally
14. Close cover
15. Reconnect power cable
16. Press power button
17. Replace cartridges

Reset Waste Ink Counter Canon Pixma MP210 and Canon Pixma MP220

There are some ways in resetting Canon Pixma MP210 and Canon Pixma MP220. Follow the instructions correctly:

1. Switch the printer off
2. Press and hold resume Button (triangle in the circle) and click “Power” button. green led should be on
3. hold the Power button, release Resume Button.
4. Without releasing the Power Button, push twice “Resume” button and then release Both Buttons.
5. Push “Resume” for four times then Push “Power” button, to confirm the selected action (reset counter absorber).
6. Switch off the printer and switch on again