A Cold Reset Printer for HP 2100

Performing a cold reset printer for HP 2100, see the procedures here:

1. Switch off the printer
2. Press and hold the “JOB CANCEL” button
3. Then switch on the printer
4. After all the LEDs on, release the “JOB CANCEL” button
5. A cold reset changes most system parameters in NVRAM to the factory defaults
6. The “JOB CANCEL” button must be released within 20 seconds
7. After all of the LEDs on, an NVRAM initialization is performed instead of a cold reset

Resetting Canon Ink Cartridges for 4600

The first you should try refilling your cartridge, then ignoring the warnings. The cartridges is like the PGI-520BK for the pixma 4600 may have newer generation chips to prevent them from being refilled and used. In this case, you must replace the cartridge or its chip. Remember that ignore the warnings that appear when printing on it, after the first you have tried to refill your cartridge. 5MBRK3TZ3HPB

Free Download Reseter Epson CX5000

Read and take the following procedures. These are steps how to reset Epson CX5000;

1. Switch on printer
2. Run the reset.bat and follow the instruction
- set the date as indicated in the reset.bat
( if there is no date, then the resetter no need to change date )
- after set the date correctly just minimalize the reset.bat
3. run serviceFT.exe from the extracted folder
6. go to maintenance then Select waste ink pad counter then click ok
7. click on "check button" till its done then click on "initialization button" then click on "finish button"
8. switch off printer for 5secs then switch on again
9. After you reset successfully, go back in reset.bat windows and you can change the date back to default

Download the software, here

Reset Epson Stylus Photo RX510 Manually

Here the procedures how to reset the Epson Stylus Photo RX510 printer. The tip is should be taken if the printer shows “ERROR”. Read the steps and follow the procedures carefully:

• Connect the power cable into the socket
• Place the printer OFF or Standby
• Press and hold the buttons together: Power, Load / Eject, Stop, B & W, Color. It’s maybe about 5 seconds, then release them.
• See the display on the printer, if it shows “Init EEPROM” press the color button for 1 second, then the printer will be reset.
• Wait until the reset process is completed.
• Now, the printer is ready to use.

Resetting Instructions for EPSON CX1500

rHere some procedures how to use the reset tool of EPSON CX1500. Please follow the instructions correctly;

1. The first step,Switch on the printer
2. Then, run the program or .exe file
3. Choose the RD setting
4. Double Click on Dump Data Rom Data
5. Replace Protection Counter A to Zero (0)
6. Click Exit

Waste Tank Counter Reset Code for Canon BJC 1000 Manually

If we want to waste tank counter reset code for BJC 1000, it means you've found the solution. This is the reset code for the BJC 1000.

1. Firstly, Remove Cartridge
2. Then, Unplug the AC Power Cord
3. Hold down the RESUME button
4. Release RESUME after plugging in the AC Power cord.
5. Press the RESUME once within 5 seconds and release the RESUME .
6. Press and HOLD RESUME for two seconds or more and release it.
7. Press and HOLD RESUME for two seconds or more and release it.
8. Finally, Unplug AC Power Cord to set data.

Instructions Reset for Epson R240-R245-R250

Here some procedures how to reset Epson R240/R245/R250. Follow the instructions correctly;

1. Switch the printer on
2. Set the Computer Date as indicated in "bat" file then run
3. Run adjprog.exe
4. Click accept
5. Set printer model then click ok
6. Select waste ink pad counter under maintenance option then click ok
7. Click read button
8. Click initialization then finish
9. Restart your printer

The Instructions Resetting for RX510, RX630 and CX6500 models Manually

Please see the big button on your printer like power on (this is on the left side) the colors black and white then stop button (these are on the right side).

1. First, pray to the God before you take an action, hopefully your printer will be fixed
2. Turn off your printer
3. Push the b/w + color + stop (or maybe OK button) together and hold
4. Push power on button and hold (so you push 4 buttons together) don't release all the button until you see the light indicator is blinking and then a message display on the small monitor
5. Release you finger from the button
6. Push the color button (once)
7. Turn off the printer
8. Turn it on again

I hope these ways can help you. Good luck...

How to Reset CX5500 atau 5505

Here the methods to reset CX5500/5505. Follow the instructions below:
1. Switch on your printer
2. Execute the adjustment program
3. Press maintenance ink pad menu
4. Select Read option
5. Select Initialize option
6. Select read option again, after "0" press finish
7. Choose set shipping data (bottom menu)
8. Wait for a while (about 1 minute)
9. It will load some paper if the printer is fixed, then the reset process will be done.
10. Turn off the printer and then turn on again. Repeat read the EEPROM
11. Exception, If there is no reaction from the printer, repeat the instructions

Printer Problems by the LED Blinking

Every printer problems have a characteristic itself. There are signed by the LED blinking. Sometimes we confuse what should we do. How to identify the signing LED. Here some to overcome the problems.
The number of the Reset :
Button pressing LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset
5) Unplug cable power. (for MP145 / MP150)
6) Turn Off Power. (for MP160)

Reseting Canon MP145 Waste Ink Counter

If your printer shows the message like this, “Error ink cartridges are not installed properly (error E5)”. I’d like to share the methods.
These are the methods should be taken:

1. Switch the Power On
2. Press and hold the power button
3. Push Reset button once, then release the power button and push reset twice till 0
4. Push + display change from 0 to 1 (push button + to change 0 to 1)
5. Push the power switch on again, then Printer will be print 1 page
6. (push power button –> start button till 1 page.)
7. Open cover
8. Unplug power cable
9. Take out ink PG 40 and PG 41
10. Plug in the power cable
11. Switch on the power button
12. Open cover (scan cover)
13. Replace Ink PG 40, PG 41 again

What's happened with your printer?

Why your printer gets blink on its lamp? and then why your printer doesn't work? It means the printer should be reset. It will occurs when your printer is giving warnings that your printer is due maintenance, this usually means that the printer has counted the amount of prints you've printed and reached a limit, which is set in the printer hardware.
The printer will stop completely after a certain amount of prints (overflow), normally requiring you to take your printer to an Epson dealer for servicing and resetting.
The service maintenance that would then be carried out is the draining / replacement of the ink pad that catches all the waste ink and resetting of the protection counter.
The ink pad replacement may be unnecessary, as this is rarely full when the maintenance messages appear. Therefore, the only requirement now is to reset the counter which will then release your printer hardware and start counting your prints from zero once more.

If the printer has passed the maximum prints and you've continued printing throughout the warnings, after the 'overflow' amount of prints, it will lock out completely giving you two flashing lights on your printer which you can't reset without this software or without pressing a sequence of buttons.